The job of a building inspector consists of reviewing construction plans and inspecting the construction site to make sure that all applicable local and national building codes are met. These professionals also examine the structure’s foundation, roof, siding, garage, plumbing and electrical equipment. Failure to meet codes may result in the inspector shutting down the project, and the building is not considered ready for occupancy. Additionally, building inspectors check for fire safety necessities and IC ratings on recessed lighting fixtures and fan boxes.

building inspectionsBuilding inspectors report any maintenance issues that are detected. Other areas covered include unsafe electrical wiring, non-functioning appliances, ventilation fans, and poor drainage around the building. Building inspectors are also familiar with the state building code and the International Code Conference property maintenance code, which covers a range of issues. However, some building inspections include facade inspections. While these services are usually included in a contracted building inspection, they may not be as comprehensive or diagnose any problems thoroughly as an engineer would.

In Adelaide, a city council passed Local Law 11 in 1998 following dangerous building accidents. The Building Facade Safety Program requires a visual survey of all elevations, including the street facade. However, the bulk of building inspections still requires cranes and scaffolds. New technologies are now available to help inspectors perform these tasks safely and efficiently. For example, a building inspector who uses rope access will not cause a danger to the public or other buildings.

A building inspection is an essential component of the construction process. It helps ensure that the building is complete and ready for occupancy. In addition, the inspector will check if the address numbers are displayed correctly and whether any outside equipment is in the proper setbacks. Lastly, building inspectors must verify that all inspections, red tags, and transportation impact fees have been properly completed. Therefore, in addition to determining the need for building inspections, it is important to learn more about the process.

In Adelaide, building inspections are performed by the Inspections Division outside the city limits of Columbia. The Adelaide Commission adopted building codes in 1985 and began providing building inspection services in 1986. This year, Adelaide adopted the 2015 International Codes. The new codes took effect April 1, 2017, so the city’s inspections will follow this change. Visit the regulations link under the “regulations” tab for any questions. In addition, you can find a copy of the codes on the Adelaide website.

Building inspections will become more important as more high-rise buildings sprout up across the country. Building inspectors must be able to recognize any signs of potential problems. Most inspectors have a high school diploma and at least some construction experience, but you can learn the job if you have the right training. About 25% of inspectors have a bachelor’s degree, and 30% have some college education and/or post-secondary certification. While most inspectors are self-trained, you may want to consider formal education to gain the right skills for the job. Technical schools and community colleges offer construction-related programs that could help you earn your license.

In addition to certification, inspectors conduct annual energy code and water-use audits of buildings. In Adelaide, these inspections are mandated by Local Laws 84 and 87. LL 84 inspections are done on buildings over 25,000 square feet, and independent benchmarking specialists assess energy and water use. These inspections occur every five years and include energy and water savings recommendations. If an inspection uncovers a problem, the inspector can issue a digital citation.

A building inspector will review blueprints and communicate with the construction project supervisor. Building inspectors may specialize in plumbing, electrical systems, and the environment depending on the job. They are often responsible for stopping a construction project if it does not meet the required standards. In some cases, inspectors will even be required to check the structures’ structural integrity. In this field, attention to detail is essential. Building inspectors also go by other titles, such as construction inspector, building code administrator, and building official.

The Frederick County Inspections Division performs Permit-related inspections. This division, located outside the city limits of Columbia, adopted building codes in 1985 and began providing inspection services in 1986. Efforts to implement the 2015 International Codes in the county will begin to show on April 1. For more information, visit the regulations link. In the meantime, you can view videos that show the exact building inspection process.

Building inspections are crucial to new construction. It is necessary to check that the building meets building codes and does not disrupt existing infrastructure. Using modern building inspection software helps inspectors carry out thorough inspections while preventing the time-consuming process of data entry and travel back to the office. In addition, increasing the efficiency of these inspections will help inspectors complete more inspections each week. And because of their convenience, they can certify more buildings each week.

In addition to mechanical systems, building inspections will check the functioning of five major systems. These include mechanical systems, plumbing systems, ventilation systems, heating systems, and electrical systems. A building inspector will have a checklist that breaks down these major systems. Electrical systems, for example, should be running smoothly. In addition, the wiring in the property should be properly sized. It is also important to check whether permits have been issued for any new work that has been performed.